Flange Automatic Balancing Machine Unlock New Concept of Auto Parts

Flange Automatic Balancing Machine, Unlock New Concept of Auto Parts

With the rapid development of the automobile manufacturing industry and the transportation industry, the requirements for the performance indicators of products are becoming higher and higher, especially the balancing of the rotating parts of the automobile is attracting more and more attention from the domestic supporting manufacturers. Full automation has slowly penetrated into our daily life.

Flange, also called flange disc or flange. Flanges are parts connected to each other between shafts and are used for connection between pipe ends. If the mass center of the flange is offset, high-speed rotation will cause vibration and noise, resulting in failure and accident; To provide comprehensive unbalance solution is what JP has been doing.

The balancing method for original rotor or disc-shaped workpiece is to stop the machine first and then conduct dynamic unbalance correction to the workpiece when the violent vibration occurs, that is, off-line unbalance correction. With the development of dynamic balancing technology, automatic balancing technology has given rise to people’s concern, and has achieved certain results. JP vertical drilling automatic balancing machine is suitable for dynamic unbalance correction of flywheel, clutch, pulley, flange, flywheel and other disc-shaped auto parts with a center hole or shaft.

The main functions of this single-station vertical drilling automatic balancing machine are as follows:

1.Can do single-plane balancing, axial and radial drilling, quick changeover, parametric adjustment, simple operation, strong compatibility;

2.Can perform offline automatic balancing or online automatic line for automatic production, can be matched with MES system, to achieve data traceability;

3.Based on rotor quality difference, the equipment is divided into 5kg class, 35Kg class and 150Kg class;

4.Weight removal features: the drilling area is limited (non-correction process holes, drilling circumference is not continuous, limited to 180° areas) or not limited (no requirements for area), the position of each hole (radius, plane) and the drilling depth allowed by each hole are specified.

Quality speaks for Jianping, quality leads everything. JP people will actively respond to the call of our country, make our national industry bigger and stronger, continue to consolidate and enhance our company's technical advantages in the same industry at home and abroad, comprehensively enhance our company's comprehensive competitiveness and brand influence, and contribute to the development of China's balancing equipment manufacturing industry.

Shanghai Jianping, do China's best dynamic balancing machine!