Maintenance Of Auto Parts Balancing Machines

The auto parts balancing machine is mainly used in the balance check of large-scale motor, machine tool spindle, fan, centrifuge, water pump, internal combustion engine, wind wheel, ceramic machinery, drum, glue stick and so on. Let's take a look at the auto parts balancing machine Maintenance and maintenance of it.

1. Auto parts balancing machine is a sophisticated testing equipment, should be responsible for the custody and operation.

2. The lens glass of the photoelectric head should always wipe the outer surface of the lens with a mirror paper or a mirror cloth to keep it clean. Do not wipe the mirror with an oiled yarn or dirty cloth.

3. All the knobs and switches on the panel are not allowed to toggle, so as not to damage the components and bring measurement errors.

4. If the measuring box is not used for a long time, it should be preheated regularly for several hours.

5. Electrical measurement box is a key component of the auto parts balancing machine, must be to prevent vibration and moisture, should be properly kept after the work should be turned off the electrical box switch.

6. Support the block or roller surface should be kept clean, not allowed to adhere to iron, dust debris, each work should be wiped before the net support block or roller and rotor journal, plus a little oil. Rotate the rotor or move the left and right support frames at the same speed so as not to scratch the surface of the journal and roller surfaces, and do not allow the rotor to be beaten or hit on the roller frame.

7. Always keep the auto parts balancing machine clean, the rail surface should be kept clean, and often oil rust.

With the use of microcomputer technology, the balancing machine has brought into a new era. The balancing machine has improved significantly in terms of performance, precision and operability, and has been improved in the fields of electric tools, machinery manufacturing, fans, motors, papermaking , Textile, household appliances, metallurgy and other fields have been more and more widely used. Here to give you about how to balance the car parts to clean it.

1. Car parts of the balance of the photoelectric head of the lens glass should always use a mirror paper or mirror cloth to wipe the outer surface of the lens to keep it clean, do not use the oil with the yarn or dirty cloth wipe the mirror. Machine is a sophisticated testing equipment, there should be a dedicated person responsible for custody and operation.

2. Auto parts balance machine should always keep the balance machine clean, the rail surface should also be kept clean, and should always be oil rust. Auto parts balancing machine support block or roller surface should also be kept clean, not allowed to stick iron Dust, debris, each work should be wiped before the net support block or roller and rotor journal, plus a little oil.

3. When moving the support parts of the Auto Parts Balancing Machines, rotate the rotor at the same time or move the left and right support frames at the same speed so as not to scratch the surface of the journal and roller surfaces. Never allow the rotor to be beaten or hit on the roller frame An unbalanced rotor produces a pressure on its support structure and the rotor itself during its rotation, resulting in vibration, so that the dynamic balance of the rotor is very necessary.