.png)
.png)
.png)
eRotor Automatic Balancing Drilling Machine with Robot
1:Three options of EV motor balancer
1)eRotor manual Balancing Machine
2)single-station EV Motor Rotor Automatic Balancing Machines
3)two-station Electric Vehicle Motor Automatic Balancing Machines
|
Rotor weight range |
2-16kg |
|
Journal diameter range |
φ15～40mm |
|
Distance between two supporting pedestals |
80-200mm |
|
Rotor diameter range |
φ100-150mm |
|
correction diameter range |
80-120mm |
|
Distance from shaft end-face to drilling surface |
10-150mm |
|
Min. Achievable Residual Unbalance (e mar ） |
0.15 g.mm/kg/plane |
|
Unbalance reduction ratio |
≥90% |
|
Cycle time |
100s（The driiling place material is aluminum, 3 holes drilled） |
|
Balancing motor drive power |
1.5kW |
|
Operating air pressure |
0.4-0.6MPa |
|
Operating voltage（V) |
as per request |
|
Correction method |
Drilling |
|
Drilling motor power |
0.75kW |
|
Total machine power |
9kw |
|
Protection |
Phase sequence protection, overload protection, air pressure monitoring |
