News Banner
Current page: Home > News > Company News > How to do dynamic ba...

How to do dynamic balance test of pump impeller

Article Source: jp balancing machine      Time:2017-12-01
The impeller is the core part of the centrifugal pump, its speed is higher than the force, the blades on the impeller play a major role, it should do the static balance experiment before impeller assembling

 



how to do dynamic balance for pump impeller?

 

When the pump is doing dynamic balance, it should be done together with the rotor components, the impeller is changed, the balance point has changed, and it needs to be corrected again. If it is an ordinary single-stage pump, it is not needed because its residual unbalance Little effect on the pump, if it is a high-speed pump, or multi-stage pump, it needs to be balanced again

 



Pump impeller automatic balancing machine, as its name implies, is a fully automated equipment that provides balancing service to the impeller of the pump. It can automate all aspects of the pump impeller from balance measurement, angle positioning, drilling, de-weighing and retesting. it is another masterpiece of Jp balancing machine Co., Ltd

 

If the impeller is not good or there is no better balance stability, it will have a hydraulic loss and gap loss at the pump inlet and leaves, so be sure to choose a good pump impeller . The pump impeller automatic balancing machine will be able to provide balanceing calibration, to improve its stability, and its quality
>*/ >*/ >*/