Soft bearing vertical balancing machine
Article Source： Jp Balancing Machines
Time：2017-09-07
As we all know about that the rotating parts have to been processed an unbalance test and vibration analysis measurement before forward to end user utility. Because of the wear and bears otherwise, the co-effects between each other parts in a heavy machine or any precise machinery, will run the machine into damage. Typically, the rotor must be taken out on a balancing machine running test. It means that the balancing instruments that can perform a report in rotor analysis can located the uneven mass distribution spots and counter balancing weight added to restore balancing rotation.
When rotating analyzers balance a rotor, first they have to decide that the two general types of dynamic balancing machines, which one has the acceptance in their type of products or rotors, flexible or rigid, and precise in requirement.
In general, if you have a small rotor to be balanced, soft bearing is the top choice since the precise is extreme among all the balance machine. It’s like that the rotor is pendulum suspension measured that even a tiny vibration can be detected by sensor. For example, soft bearing vertical balancing machine for JP Balancing Machines, the ring rotor is rotating on the spindle fixed by the pneumatic clamping. A 0.001g unbalance weight can be located on the plane scale on screen. Moveover, soft bearing machines always have high rotating speed especially on a vertical spindle. The rotor boost fast and brake fast. Productive enhanced. Beyond this, soft bearing machines are portable and convenient to take.
.png)
.png)
.png)
