.png)
.png)
.png)
If the rotor is not balanced, the additional dynamic pressure will be transmitted to the machine through the bearing and cause the whole machine vibration and producing noise, accelerating bearing wear. An inertial force system will be consisted of inertial forces produced by numerous particles in the mass when any of the rotors are rotating at an average speed. To determine whether the rotor is balanced, it must be based on the results of its inertial force. In particular, the importance of rotor balance is seen. JP Balancing Machines has been in the path of innovative technology that never stopped in creating two-position automatic balancing machine and soft Bearing balancing machine.
The machine uses a special electrical measurement system, you can balance the maximum weight of 1.6 kg, 40 mm diameter rotors. Measurement has diversification, dynamic and static balance, support up to 10 kinds, plus weight. Measurement accuracy is restricted by the use of multiple calibration coefficient combination, automatically adjust the system sensitivity, and hardware and software dual filter.
Features:
1. Balance Process without repeat. Operation by one worker.
2. Throughput has a lower rate of decline.
3. Replace the product, only need to replace the product fixture and adjust the sensor position,
4. AI interface, the production capacity and real-time production information memory function.
The following two series of soft bearing balancer is specifically for micro-motor rotors. The use of DC speed control achieves stepless speed adjustment. High sensitivity measurement pendulum with high sensitivity, convenient operation achieve higher measurement accuracy. Touch screen is praised by the majority of users
