Fluid Torque Converter Special Automatic Balancing Machine

Which parts of the fluid torque converter need to be dynamically balanced?

The fluid torque converter involves a variety of processes such as precision stamping, high temperature brazing, precision casting, high precision balancing, online automatic detection, etc., and integrates the technologies of casting, stamping, welding, assembly and automatic detection. The dynamic balancing is a crucial process in the production and manufacturing process of the fluid torque converter, which directly determines the working performance, service life and quality of the transmission. As the end of the entire production process, the balancing accuracy and performance of the unbalance measurement and correction directly affect the final quality assessment of the product, the overall production efficiency and the cost control of the enterprise.

Each component of the fluid torque converter and the assembly requires high precision balancing, including:

1 Pump impeller balancing

2 Turbine balancing

3 Guide wheel balancing

4 Housing balancing

5 Fluid torque converter assembly balancing

The difficulty of fluid torque converter balancing

1 More parts need to be balanced, not only need to balance the individual parts, but also to balance the assembly, each component structure is different resulting in the design of the balancing equipment needs to be more flexible, more widely applicable;

2 The balancing of the fluid torque converter, not only the static balancing of the components, but also the balancing under different operating modes, such as the balancing under differential and reversal conditions. The requirements for balancing in each car brand are not only diverse, but also tend to be more complex and more precise.

The advantages of JP balancing machine to balance the fluid torque converter

1 Suitable for semi-automatic or automatic single-plane balancing of vertical rotor with bearing and measurement and correction of unbalance of fluid torque converter;

2 Unbalance measurement and correction using a welding system with its own balancing unit, high-precision fixture and a cutting and forming device;

Can be equipped with multiple stations and integrated production lines according to customer needs for mass production;

3 Measurement, calculation and correction control of unbalance based on micro-processed measuring units;

4 Semi-automatic manual loading or full automatic operation of the production line can be realized;

5 Can connect the production line for mass production;

6 Automatic unbalance correction, correct by welding.

If you have questions about the balancing of the fluid torque converter, or would like to discuss it further with our technicians, please feel free to contact us.