Driveshaft Balancing Machines Drive Line Balancers

When you see a strange object, the first thing you want to know is what does it do? The drive shaft, in short, the shaft that transmits the driving force, which is a force transmission medium that transmits the driving force output by diesel engine after transmission speed reduction and torque increase to the driving wheel of the car. Without it, the wheel cannot be driven to rotate, and if the wheel cannot rotate, how does the car run? Now let's look at the function of the car drive shaft together!

The transmission shaft is the shaft that can transmit the driving force in the universal transmission device. This is a rotating body with high speed and less support plate, so its rotor dynamic balancing is particularly important. Usually the drive shaft in the original factory must use the drive shaft balancing machine to measure its dynamic balance, and carry out the correction in the balancing machine. For cars with front rear drive external modules, the rotation of the transmission is transferred to the shaft of the main reducer, which can be several sections, and the middle of the section can be connected by a cross shaft.

Drive shaft balancing machine

Brief introduction:

Well-designed brackets, transmit mechanical force, firm and durable, with low vibration damping and good rigidity

High sensitivity sensor, good linearity, high machine efficiency

Jianping independent R&D electronic measurement system

Friendly PLC HMI, easy to operate

Network/intelligence, in line with Industry 4.0

PHC type drive shaft balancing machine is the balancing equipment dedicated to test all kinds of drive shafts

According to the design structure, this machine belongs to hard-bearing dynamic balancing machine, which can not only avoid the severe vibration of soft-bearing balancing machine during rotor start and stop, but also can obtain good vibration signal. Convenient to disassemble and assemble the workpiece. Suitable for mass production

Jianping drive shaft balancing machine is mainly used in automobile drive shaft production and repair manufacturers, it has the features of easy operation, high balancing accuracy, is the ideal equipment for automobile drive shaft dynamic unbalance detection. Welcome to contact us for the latest balancing technology!