Causes of Imbalance -Rotor Balancing Machine

Causes of rotor imbalance

Shanghai Jianping Dynamic Balancing Machine Manufacturing Co., Ltd. gives you a brief introduction to the reasons for the rotor imbalance caused by the following balancing machines. It is expected that the readers will have a beginning to understand the balancing machine rotor through this article.

The device is faulty, and the center line of the mass of one part does not coincide with the center line of rotation.

Casting vent

Device error

Half key question

The rotor is deformed, and the rotor is deformed due to residual stress and uneven heating.

Deposit on the rotor

The planning is not uniform, such as the side of the motor rotor winding and the other side is not uniform.