Automatic Balancing System for Car Brake Discs-automatic vertical milling, weight removal and unbalance correction!

When the brake jitters, it means that the brake disc has been deformed in a strict sense, which is related to the dynamic balancing, when the brake disc can not achieve dynamic balancing, the brake will jitter. Shanghai Jianping provides brake disc manufacturers with a variety of brake disc applicable dynamic balancing machine equipment, such as the A1LX20 series brake disc balancing machine, which can do automatic milling, weight removal and correction to the brake disc workpiece, effectively improve the dynamic unbalance detection efficiency.

Brakedisc dynamic balancing machine is suitable for the dynamic unbalance correction of brake disc, brake drum, impeller and other disc-shaped parts with center holes or shafts , mainly has the following features:

1.Single-station single-plane balancing, cylindrical face or end face milling, quick changeover, parametric adjustment, simple operation, strong compatibility;

2.Can perform offline single automatic balancing, also can integrate with automatic line for online automatic production, can be matched with MES system, to achieve data traceability;

3.Brake disc unbalance weight removal characteristics: milling area is limited (non-correction process holes, milling circumference direction discontinuous, limited 180 degree area, etc.) or not limited (no requirements for area).

4.The brake disc balancing machine specifies the milling position (radius, plane) and the allowable milling depth.

Because the brake disc is an important part of the automobile braking system, a good brake disc has stable braking, no noise, no jitter. In the production of casting, brake disc is generally centered on the axis, the phenomenon that the center point is heavy on one side and light on another side will appear, when such a disc workpiece rotates at high speed, the generated parabola is not in a circle, causing the car to shake when moving, and the brake disc dynamic unbalance correction machine is to eliminate this phenomenon.

Choosing an efficient, reliable and accurate balancing test equipment is what every brake disc manufacturer and maintenance provider needs.

JP's goal is to become the world's leading manufacturer of automatic brake disc vertical milling balancing machine, and cooperate with global auto parts suppliers and service providers to contribute to the development of the auto parts market. You just it and we are just professional in it, welcome to contact us!