Auto Flywheel Automatic Balancing Machine, Ensure Flywheel Stability

Auto Flywheel Automatic Balancing Machine, ensure flywheel stability

As we all know, the automobile flywheel is a mass-increased cast iron inertia disc installed in the power output end of the crankshaft, used to store engine energy, supply the demand for non-work stroke. With the help of the inertia force of flywheel rotation, the compression resistance in the cylinder can be reduced during starting and the inherited operation of engine can be maintained during short-term overload. The flywheel, as a key component connecting the automobile engine system and transmission system, must be tested and corrected by the flywheel automatic balancing machine before it can be put into the market to ensure stability.

From the beginning of research and development to putting into the market, Shanghai Jianping has made great efforts for the automotive flywheel industry.

In order to better improve the balancing efficiency of the flywheel and increase the output and quality of customers, Jianping uses advanced technology to achieve the transformation of the flywheel balancing from manual operation to fully automatic operation. The flywheel from unbalance measurement, angle positioning, drilling & weight removal and retest are all implemented automatically, saving labor and time costs, and more suitable for mass production.

Machine brief introduction

Flywheel automatic balancing machine: used for the unbalance correction of automotive flywheels, it achieves full automation in the operation. After the flywheel is placed on the machine, the machine automatically performs positioning, unbalance detection and correction without human intervention, increasing efficiency and accuracy. The flywheel balancing machine is also suitable for the weight removal and disc-shaped flywheel, ensuring the stability and reliability of the flywheel during use.

1.High efficiency, the working cycle time of the equipment (initial test + milling + retest) can reach 40 seconds, and the test and milling are carried out simultaneously;

2.High machining precision, good stability, easy changeover;

3.Simple, the operator can operate through short-time training;

The auto parts industry is huge, but it is not easy to make each product reach high quality, Jianping hopes to use its own technology to help more customers to improve product quality and better serve everyone.